Dry Conditions Bearings Type CP
Dry self-lubricating bushings type CP
They consist of steel reinforcement with tin/sintered bronze coating layer, pores filled and covered by a PTFE creep layer with molybdenum disulfide additives.Available on request with AISI 316 L steel reinforcement
Features
High mechanical strength.
Good thermal and electrical conductivity. Chemical inertia to industrial solvents.
Increase the max speed and PV values in the presence of fluids.
Friction of first detachment almost zero.
Recommended pins: in ferrous alloys, chromed stainless steel or anodized aluminium
Not recommended: bronze, aluminium and phosphated and nickel-plated materials (max roughness 0.24 µ CLS).
- Recommended shaft tolerances: 3 ~ 4 = H6 / 5 ~ 75 = f7 / 80 ~ 300 = H8
- Recommended tolerances for seats: 4.5 = H6 / 5.5 ~ 305 = H7
|
|
Static |
250N / mm2 |
|
Max Load |
Low Speed |
140N / mm2 |
|
|
Rotation and Oscillation |
60N / mm2 |
|
|
Short term | 3,6 N / mm2 * m/s |
|
PV Max to Dry |
In continuous operation
|
1,8 N / mm2 * m/s |
|
|
|
|
|
Working Temperature |
|
-195 °C ~ +280°C |
|
Friction Coefficient |
0.03 ~0.20 |
|
|
|
-20 ~ +90 |
|
|
Max Speed
|
Dry |
2m/s |
|
|
Hydrodynamic operation |
>2m/s |
| Thermal Conductivity | 42W (m * K)-1 | |
|
Thermal Expansion Coefficient
|
11 * 10-6 (K-1) |
PRODUCT LIST - DOWNLOAD PDF
You can order, edit, or limit the item sheet by entering the desired size or code in the search fields. Unit of measurement in millimetres.
Table reading guide: d = inner diameter - D = outer diameter - L = length
|
PLEASE FILL THE FORM for INFORMATION ON CPS PRODUCTS
|