Self-lubricating sintered bronze bushings type C
Self-lubricating sintered bearings
Bearings are porous metallic components made of bronze or iron impregnated with lubricating oil. The oil contained in the porosity provides constant lubrication between bearing and shaft, so the system requires no external lubricant.
Sintered bearings Type C
Bronze: SINT A50 (DIN 30910-3:2004-11)
SELFOIL (UNE 96002:2023)
Suitable for high speed and low load.
Possibility of solid lubricant (graphite or MoS2).
Good friction factor.
Silent working.
Reduced tolerances.
Recommended Housing tolerances: H7
• Shaft tolerances: on request
• Shaft Hardness > 20 HRC
• Shaft Roughness < 0,3 Ra
|
Density |
(gr./cm3) |
6,4 ~ 6,8C |
|
Static Load |
(kg./cm2) |
200 |
|
Dynamic Load |
(PV=kg./cm2 × m/sec.) |
18 |
|
max linear Speed |
(m./sec.) |
7 |
|
Volume of oil impregnation |
(%) |
22 |
|
Hardness |
(HB=kg./cm2) |
25 |
|
Friction Coefficient |
|
0,030 |
|
Traction Resistence |
(kg./xmm2) |
10 ~ 20 |
|
Elongation |
(%) |
1 ~ 2,5 |
|
max Thermal Temperature with mineral oil |
(°C) |
-20 ~ +90 |
|
max Thermal Temperature with syntethic oil |
(°C) |
-20 ~ +120 |
|
max Thermal Temperature graphite / MoS2 |
(°C) |
-40 ~ +180 |
SCARICA PDF PRODUCT LIST
It is possible to order, modify or limit the item list by entering the desired size or code in the appropriate search fields. Unit of measurement expressed in millimeters.
Table guide: d = inner diameter - D = outer diameter - L = length
(*) Note: the bushings with code B, not being standard, must always be requested to our sales office, which will indicate delivery times, quotations and any minimum lots.
|
PLEASE FILL THE FORM for INFORMATION ON CPS PRODUCTS
|